Intercept theorem

This article is about the theorem about the ratios of various line segments. For the special case of the inscribed angle theorem, see Thales's theorem.

The intercept theorem, also known as Thales's theorem, basic proportionality theorem or side splitter theorem, is an important theorem in elementary geometry about the ratios of various line segments that are created if two rays with a common starting point are intercepted by a pair of parallels. It is equivalent to the theorem about ratios in similar triangles. It is traditionally attributed to Greek mathematician Thales. It was known to the ancient Babylonians and Egyptians, although its first known proof appears in Euclid's Elements.

Formulation of the theorem

intercept theorem with rays

|SA| / |SB| = |AC| / |BD| does not necessarily imply AC is parallel to BD.

Suppose S is the common starting point of two rays, and two parallel lines are intersecting those two rays (see figure). Let A, B be the intersections of the first ray with the two parallels, such that B is further away from S than A, and similarly C, D are the intersections of the second ray with the two parallels such that D is further away from S than C. In this configuration the following statements hold:

1. The ratio of any two segments on the first ray equals the ratio of the according segments on the second ray:
   ${\frac {|SA|}{|AB|}}={\frac {|SC|}{|CD|}}$, ${\frac {|SB|}{|AB|}}={\frac {|SD|}{|CD|}}$, ${\frac {|SA|}{|SB|}}={\frac {|SC|}{|SD|}}$
2. The ratio of the two segments on the same ray starting at S equals the ratio of the segments on the parallels:
   ${\frac {|SA|}{|SB|}}={\frac {|SC|}{|SD|}}={\frac {|AC|}{|BD|}}$
3. The converse of the first statement is true as well, i.e. if the two rays are intercepted by two arbitrary lines and ${\frac {|SA|}{|AB|}}={\frac {|SC|}{|CD|}}$ holds then the two intercepting lines are parallel. However, the converse of the second statement is not true (see graphic for a counterexample).

Extensions and conclusions

intercept theorem with a pair of intersecting lines

intercept theorem with more than two lines

The first two statements remain true if the two rays get replaced by two lines intersecting in $S$. In this case there are two scenarios with regard to $S$, either it lies between the 2 parallels (X figure) or it does not (V figure). If $S$ is not located between the two parallels, the original theorem applies directly. If $S$ lies between the two parallels, then a reflection of $A$ and $C$ at $S$ yields V figure with identical measures for which the original theorem now applies. The third statement (converse) however does not remain true for lines.

If there are more than two rays starting at $S$ or more than two lines intersecting at $S$, then each parallel contains more than one line segment and the ratio of two line segments on one parallel equals the ratio of the according line segments on the other parallel. For instance if there's a third ray starting at $S$ and intersecting the parallels in $E$ and $F$, such that $F$ is further away from $S$ than $E$, then the following equalities holds:

${\frac {|AE|}{|BF|}}={\frac {|EC|}{|FD|}}$ , ${\frac {|AE|}{|EC|}}={\frac {|BF|}{|FD|}}$

For the second equation the converse is true as well, that is if the 3 rays are intercepted by two lines and the ratios of the according line segments on each line are equal, then those 2 lines must be parallel.

Related concepts

Similarity and similar triangles

Arranging two similar triangles, so that the intercept theorem can be applied

The intercept theorem is closely related to similarity. It is equivalent to the concept of similar triangles, i.e. it can be used to prove the properties of similar triangles and similar triangles can be used to prove the intercept theorem. By matching identical angles you can always place two similar triangles in one another so that you get the configuration in which the intercept theorem applies; and conversely the intercept theorem configuration always contains two similar triangles.

Scalar multiplication in vector spaces

In a normed vector space, the axioms concerning the scalar multiplication (in particular $\lambda \cdot ({\vec {a}}+{\vec {b}})=\lambda \cdot {\vec {a}}+\lambda \cdot {\vec {b}}$ and $\|\lambda {\vec {a}}\|=|\lambda |\cdot \ \|{\vec {a}}\|$) ensure that the intercept theorem holds. One has ${\frac {\|\lambda \cdot {\vec {a}}\|}{\|{\vec {a}}\|}}={\frac {\|\lambda \cdot {\vec {b}}\|}{\|{\vec {b}}\|}}={\frac {\|\lambda \cdot ({\vec {a}}+{\vec {b}})\|}{\|{\vec {a}}+{\vec {b}}\|}}=|\lambda |$

Applications

Algebraic formulation of compass and ruler constructions

There are three famous problems in elementary geometry which were posed by the Greeks in terms of compass and straightedge constructions:

1. Trisecting the angle
2. Doubling the cube
3. Squaring the circle

It took more than 2000 years until all three of them were finally shown to be impossible. This was achieved in the 19th century with the help of algebraic methods, that had become available by then. In order to reformulate the three problems in algebraic terms using field extensions, one needs to match field operations with compass and straightedge constructions (see constructible number). In particular it is important to assure that for two given line segments, a new line segment can be constructed, such that its length equals the product of lengths of the other two. Similarly one needs to be able to construct, for a line segment of length $a$, a new line segment of length $a^{-1}$. The intercept theorem can be used to show that for both cases, that such a construction is possible.

Construction of a product

Construction of an inverse

Dividing a line segment in a given ratio

To divide an arbitrary line segment ${\overline {AB}}$ in a $m:n$ ratio, draw an arbitrary angle in A with ${\overline {AB}}$ as one leg. On the other leg construct $m+n$ equidistant points, then draw the line through the last point and B and parallel line through the mth point. This parallel line divides ${\overline {AB}}$ in the desired ratio. The graphic to the right shows the partition of a line segment ${\overline {AB}}$ in a $5:3$ ratio.

Measuring and survey

Height of the Cheops pyramid

measuring pieces

computing C and D

According to some historical sources the Greek mathematician Thales applied the intercept theorem to determine the height of the Cheops' pyramid. The following description illustrates the use of the intercept theorem to compute the height of the pyramid. It does not, however, recount Thales' original work, which was lost.

Thales measured the length of the pyramid's base and the height of his pole. Then at the same time of the day he measured the length of the pyramid's shadow and the length of the pole's shadow. This yielded the following data:

• height of the pole (A): 1.63 m
• shadow of the pole (B): 2 m
• length of the pyramid base: 230 m
• shadow of the pyramid: 65 m

From this he computed

$C=65~{\text{m}}+{\frac {230~{\text{m}}}{2}}=180~{\text{m}}$

Knowing A, B and C he was now able to apply the intercept theorem to compute

$D={\frac {C\cdot A}{B}}={\frac {1.63~{\text{m}}\cdot 180~{\text{m}}}{2~{\text{m}}}}=146.7~{\text{m}}$

Measuring the width of a river

The intercept theorem can be used to determine a distance that cannot be measured directly, such as the width of a river or a lake, the height of tall buildings or similar. The graphic to the right illustrates measuring the width of a river. The segments $|CF|$,$|CA|$,$|FE|$ are measured and used to compute the wanted distance $|AB|={\frac {|AC||FE|}{|FC|}}$.

Parallel lines in triangles and trapezoids

The intercept theorem can be used to prove that a certain construction yields parallel line (segment)s.

If the midpoints of two triangle sides are connected then the resulting line segment is parallel to the third triangle side (Midpoint theorem of triangles).

If the midpoints of the two non-parallel sides of a trapezoid are connected, then the resulting line segment is parallel to the other two sides of the trapezoid.

Historical aspects

The theorem is traditionally attributed to the Greek mathematician Thales of Miletus, who may have used some form of the theorem to determine heights of pyramids in Egypt and to compute the distance of ship from the shore.

Proof

An elementary proof of the theorem uses triangles of equal area to derive the basic statements about the ratios (claim 1). The other claims then follow by applying the first claim and contradiction.

Claim 1

Notation: For a triangle the vertical bars ($|\ldots |$) denote its area and for a line segment its length. Proof: Since $CA\parallel BD$, the altitudes of $\triangle CDA$ and $\triangle CBA$ are of equal length. As those triangles share the same baseline, their areas are identical. So we have $|\triangle CDA|=|\triangle CBA|$ and therefore $|\triangle SCB|=|\triangle SDA|$ as well. This yields ${\frac {|\triangle SCA|}{|\triangle CDA|}}={\frac {|\triangle SCA|}{|\triangle CBA|}}$ and ${\frac {|\triangle SCA|}{|\triangle SDA|}}={\frac {|\triangle SCA|}{|\triangle SCB|}}$ Plugging in the formula for triangle areas (${\tfrac {{\text{baseline}}\cdot {\text{altitude}}}{2}}$) transforms that into ${\frac {|SC||AF|}{|CD||AF|}}={\frac {|SA||EC|}{|AB||EC|}}$ and ${\frac {|SC||AF|}{|SD||AF|}}={\frac {|SA||EC|}{|SB||EC|}}$ Canceling the common factors results in: (a) $\,{\frac {|SC|}{|CD|}}={\frac {|SA|}{|AB|}}$ and (b) $\,{\frac {|SC|}{|SD|}}={\frac {|SA|}{|SB|}}$ Now use (b) to replace $|SA|$ and $|SC|$ in (a): ${\frac {\frac {|SA||SD|}{|SB|}}{|CD|}}={\frac {\frac {|SB||SC|}{|SD|}}{|AB|}}$ Using (b) again this simplifies to: (c) $\,{\frac {|SD|}{|CD|}}={\frac {|SB|}{|AB|}}$ $\,\square$

Claim 2

Draw an additional parallel to $SD$ through A. This parallel intersects $BD$ in G. Then one has $|AC|=|DG|$ and due to claim 1 ${\frac {|SA|}{|SB|}}={\frac {|DG|}{|BD|}}$ and therefore ${\frac {|SA|}{|SB|}}={\frac {|AC|}{|BD|}}$ $\square$

Claim 3

Assume $AC$ and $BD$ are not parallel. Then the parallel line to $AC$ through $D$ intersects $SA$ in $B_{0}\neq B$. Since $|SB|:|SA|=|SD|:|SC|$ is true, we have $|SB|={\frac {|SD||SA|}{|SC|}}$ and on the other hand from claim 1 we have $|SB_{0}|={\frac {|SD||SA|}{|SC|}}$. So $B$ and $B_{0}$ are on the same side of $S$ and have the same distance to $S$, which means $B=B_{0}$. This is a contradiction, so the assumption could not have been true, which means $AC$ and $BD$ are indeed parallel $\square$

References

• French, Doug (2004). Teaching and Learning Geometry. BLoomsbury. pp. 84–87. ISBN 9780826473622. (online copy, p. 84, at Google Books)
• Agricola, Ilka; Friedrich, Thomas (2008). Elementary Geometry. AMS. pp. 10–13, 16–18. ISBN 0-8218-4347-8. (online copy, p. 10, at Google Books)
• Stillwell, John (2005). The Four Pillars of Geometry. Springer. p. 34. ISBN 978-0-387-25530-9. (online copy, p. 34, at Google Books)
• Ostermann, Alexander; Wanner, Gerhard (2012). Geometry by Its History. Springer. pp. 3–7. ISBN 978-3-642-29163-0. (online copy, p. 3, at Google Books)
• Lorenz Halbeisen, Norbert Hungerbühler, Juan Läuchli: Mit harmonischen Verhältnissen zu Kegelschnitten: Perlen der klassischen Geometrie. Springer 2016, ISBN 9783662530344, pp. 191–208 (German)

External links

• Intercept Theorem at PlanetMath
• Alexander Bogomolny: Thales' Theorems and in particular Thales' Theorem at Cut-the-Knot
• intercept theorem interactive